WEBVTT FILE

Step 1
00:00:00.000 --> 00:00:11.000 line:16 position:50% align:center size:100%
Tools required: Screwdriver TX20

Step 1
00:00:11.000 --> 00:00:30.000 line:16 position:50% align:center size:100%
Connect the ground conductor of the battery at an external point.

Step 1
00:00:30.000 --> 00:00:39.000 line:16 position:50% align:center size:100%
Only one conductor may be connected to each pin.

Step 1
00:00:39.000 --> 00:00:55.000 line:16 position:50% align:center size:100%
Use a suitable measuring instrument to check the polarity of the DC cabling when the battery is switched on.

Step 1
00:00:55.000 --> 99:59:59.999 line:16 position:50% align:center size:100%
Tools required: Screwdriver TX20